Signal Generator & Amplifier - Ipc

Provides sine, square or triangular waveforms. Frequency selection is by a switched range and continuously variable fine adjustment control. The frequency is displayed on an LED display. All connections are via pairs of labelled 4mm sockets with one of each pair connected to earth. An illuminated on/off switch is mounted on the rear panel adjacent to a fused IEC mains inlet. Enclosed in a robust metal case with a durable powder coated finish. Supply: 220-240VAC, 50-60Hz Dimensions/Weight: 255 x 220 x 110mm, 3.2kg Sig. Gen. Mode Waveforms: Sine, Square & Triangular, sinewave distortion 1% on all ranges, square wave rise time 1μs approx. Frequency Range:0.1Hz to 100kHz in six ranges, accuracy ±5% on all ranges Voltage Output: 0 to 10V (peak to peak), continuously variable across all ranges & waveforms 4Ω Output: Power output of 4W over entire frequency & waveforms, will drive loudspeaker or other suitable devices 600Ω Output: Provides attenuation settings: x 1, x 0.1 & x 0.01, all ±5% Amplifier Mode Performance:Voltage gain 0 to 100, Input impedance 1MΩ, Max. input 200mV (pk to pk), Output spec. same as above Frequency Response: 1Hz to 100kHz (-3dB bandwidth). 3 year warranty.  Compatible with the Better Equipped Vibration Generator (code 1001) and Frederiksen Vibration Generator (code 2976).